Lozier Gap Filler
Select your gap width to find your SKU and price
Standard Charcoal (CHR) finish usually ships in 1–2 weeks.
About the Lozier Gap Filler
Lozier Gap Fillers close the open space between the Bottom Rail and the floor on the rear side of wall shelving runs. Without a Gap Filler in place, that rear gap is visible from above and collects debris, which creates a sanitation and appearance problem on live selling floors. The component installs at floor level behind the base, running the full width of the section it covers.
Section width is the only dimension you need to match when selecting a Lozier Gap Filler. The catalog covers four widths: 24-inch (GF2.CHR), 30-inch (GF30.CHR), 36-inch (GF3.CHR), and 48-inch (GF4.CHR). Order one Gap Filler per section and match the width to the section width of your existing wall run. The Gap Filler is specified for use with both the standard 06 Base (8-inch height) and the Low Base (6-inch height), so base height does not drive the selection.
All four Gap Filler SKUs on this page are finished in Charcoal (CHR). The Lozier catalog specifies CHR as the standard finish for this component, which pairs directly with Open Base Front installations where Charcoal Base Brackets are required. If your wall run uses Platinum (PLT) Uprights and rails above the base, the Gap Filler at floor level installs behind the base front and is not typically visible from the aisle, so the CHR finish does not create a visual mismatch in standard configurations. Confirm your specific installation before ordering if finish consistency at floor level is a concern for your store.
For ordering help or to confirm compatibility with your existing wall section configuration, call 800-934-6798 or email dan@gondolafixtures.com.
Quick Reference
The Lozier Gap Filler installs at floor level on the rear side of wall shelving sections. Its function is to fill the open gap between the Bottom Rail and the floor. The Lozier catalog designates it for use with both the 06 Base (8-inch height) and the Low Base (6-inch height).
Four widths are available: 24-inch, 30-inch, 36-inch, and 48-inch. Match the width to the section width of the wall run. Width is the only variable. There is no height or depth dimension to select for this component.
All Gap Filler SKUs ship in Charcoal (CHR). CHR is the catalog-specified standard finish for this component. It coordinates directly with Open Base Front sections, where the Lozier catalog specifies Charcoal Base Brackets as the correct pairing.
Pricing runs from $33.07 for the 36-inch (GF3.CHR) and 48-inch (GF4.CHR) widths to $38.83 for the 30-inch (GF30.CHR). The 24-inch (GF2.CHR) is priced at $38.25. Order one piece per section width.
Configuration Reference
The Lozier Gap Filler installs at floor level on the rear side of wall shelving sections. Its function is to fill the open gap between the Bottom Rail and the floor. The Lozier catalog designates it for use with both the 06 Base (8-inch height) and the Low Base (6-inch height).
Four widths are available: 24-inch, 30-inch, 36-inch, and 48-inch. Match the width to the section width of the wall run. Width is the only variable. There is no height or depth dimension to select for this component.
All Gap Filler SKUs ship in Charcoal (CHR). CHR is the catalog-specified standard finish for this component. It coordinates directly with Open Base Front sections, where the Lozier catalog specifies Charcoal Base Brackets as the correct pairing.
Pricing runs from $33.07 for the 36-inch (GF3.CHR) and 48-inch (GF4.CHR) widths to $38.83 for the 30-inch (GF30.CHR). The 24-inch (GF2.CHR) is priced at $38.25. Order one piece per section width.
Frequently Asked Questions
What does a Lozier Gap Filler do and where does it install?
The Lozier Gap Filler fills the open space between the Bottom Rail and the floor on the rear side of wall shelving sections. It installs at floor level behind the base and runs the full section width. The Lozier catalog specifies it for use with both the 06 Base and the Low Base.
How do I know which width Gap Filler to order for my wall run?
Match the Gap Filler width to the section width of the wall shelving section it will cover. The four available widths are 24, 30, 36, and 48 inches, corresponding to SKUs GF2.CHR, GF30.CHR, GF3.CHR, and GF4.CHR. Order one piece per section.
Lozier Gap Filler finish compatibility with Platinum wall runs
All Lozier Gap Filler SKUs on this page are finished in Charcoal (CHR), which is the catalog-specified standard finish for this component. Because the Gap Filler installs behind the base on the rear of the wall section, it is not typically visible from the aisle in standard configurations. Verify your specific installation if floor-level finish consistency is a requirement.
Does the Lozier Gap Filler work with both the 06 Base and the Low Base?
Yes. The Lozier catalog specifies the Gap Filler for use with either the 06 Base (8-inch height) or the Low Base (6-inch height). Base height does not affect which width SKU you order. Width is the only selection variable for this component.