Wire Binning Dividers, Cross Dividers & Fronts
Select size and finish to find your SKU and price
About the Wire Binning Dividers, Cross Dividers & Fronts
Lozier Wire Binning Dividers (BFD) separate merchandise on gondola shelves by creating individual product channels across the shelf surface. Each divider runs front to back on the shelf, locks together with Wire Binning Fronts (WBF) to create a rigid binning system, and is sized to match your shelf depth exactly. Selecting the wrong depth is the most common ordering error on this component.
Depth selection drives the SKU. Wire Binning Dividers are available in depths of 10, 13, 15, 16, 17, 19, 22, and 25 inches, matching the standard Lozier shelf depth increments used across island and wall sections. The height dimension controls bin opening size: 3-inch height for shallow product channels, 5-inch height for taller product bins, and 7-inch height for the deepest bin opening. Note that 5-inch and 7-inch height dividers fit your existing Wire Binning Fronts, but the pairing rules matter: 5-inch height dividers work with either 3-inch or 5-inch height Wire Binning Fronts, and 7-inch height dividers work with either 5-inch or 7-inch height Wire Binning Fronts. Also note that BFD510, BFD713, and certain other combinations are not available in the Lozier catalog; the configurator on this page shows only orderable SKUs.
The standard finish for Wire Binning Dividers is Chrome Plated (BCP). The 22-inch depth, 5-inch height SKU (BFD522) is stocked in Charcoal (CHR), and the 22-inch depth, 3-inch height SKU (BFD322) is available in Platinum (PLT). All other SKUs on this page are Chrome Plated (BCP). Non-BCP, non-CHR finishes fall under Optional Catalog Colors and carry an 8 to 10 week lead time from Lozier. For time-sensitive orders, confirm lead time before committing. One critical compatibility warning: Wire Binning series wire is not interchangeable with the Freestanding Wire series. BFD dividers lock only with Wire Binning Fronts (WBF) and Wire Binning Cross Dividers (BFCD), not with Freestanding Wire or Standard Wire Fencing components.
Call 800-934-6798 or email dan@gondolafixtures.com if you need help matching divider depth to an existing shelf installation or confirming lead time on a specific finish and height combination.
Quick Reference
Wire Binning Dividers install on the shelf surface and run front to back to separate merchandise into individual product channels. The actual length across the top of each divider is approximately 1/2 inch less than the nominal depth listed in the part number. Order the depth that matches your installed Lozier shelf depth, not the section depth.
Height selection determines bin opening size. The 3-inch height creates a low front channel, the 5-inch height creates a mid-depth bin, and the 7-inch height is the deepest bin option. The 7-inch height is available only in Chrome Plated (BCP) across all depths on this page. The 5-inch and 7-inch height dividers each work with more than one Wire Binning Front height, so confirm the Front height already installed before ordering.
Wire Binning Dividers lock with Wire Binning Fronts (WBF) to form a rigid system. They are not interchangeable with Freestanding Wire series dividers (FSD) or Standard Wire Fencing dividers (SWD), which use different attachment and wire spacing. Mixing series produces a system that will not lock properly.
Chrome Plated (BCP) is the standard finish for nearly all BFD SKUs on this page. The BFD522.CHR in Charcoal and BFD322.PLT in Platinum are the finish exceptions reflected in the catalog facts for this page. Optional Catalog Colors beyond BCP and CHR carry an 8 to 10 week lead time from Lozier manufacturing.
Configuration Reference
Wire Binning Dividers install on the shelf surface and run front to back to separate merchandise into individual product channels. The actual length across the top of each divider is approximately 1/2 inch less than the nominal depth listed in the part number. Order the depth that matches your installed Lozier shelf depth, not the section depth.
Height selection determines bin opening size. The 3-inch height creates a low front channel, the 5-inch height creates a mid-depth bin, and the 7-inch height is the deepest bin option. The 7-inch height is available only in Chrome Plated (BCP) across all depths on this page. The 5-inch and 7-inch height dividers each work with more than one Wire Binning Front height, so confirm the Front height already installed before ordering.
Wire Binning Dividers lock with Wire Binning Fronts (WBF) to form a rigid system. They are not interchangeable with Freestanding Wire series dividers (FSD) or Standard Wire Fencing dividers (SWD), which use different attachment and wire spacing. Mixing series produces a system that will not lock properly.
Chrome Plated (BCP) is the standard finish for nearly all BFD SKUs on this page. The BFD522.CHR in Charcoal and BFD322.PLT in Platinum are the finish exceptions reflected in the catalog facts for this page. Optional Catalog Colors beyond BCP and CHR carry an 8 to 10 week lead time from Lozier manufacturing.
Frequently Asked Questions
How do I know which Wire Binning Divider depth to order for my gondola shelves?
Match the divider depth to your installed Lozier shelf depth. Wire Binning Dividers are available in depths of 10, 13, 15, 16, 17, 19, 22, and 25 inches, and each depth corresponds directly to a standard Lozier shelf depth. Measure the shelf from the back panel to the front edge, then select that depth. Keep in mind the actual divider length across the top runs approximately 1/2 inch less than the nominal depth in the part number.
Can I use Lozier Wire Binning Dividers with Freestanding Wire or Standard Wire Fencing fronts?
No. Wire Binning series components are not interchangeable with the Freestanding Wire series or the Standard Wire Fencing series. Wire Binning Dividers (BFD) lock only with Wire Binning Fronts (WBF) to form a rigid system. Freestanding Wire and Standard Wire Fencing use different attachment methods and wire spacing that are incompatible with the BFD locking design.
Lozier Wire Binning Divider height options: 3-inch vs 5-inch vs 7-inch
The three height options control the depth of the product bin opening. The 3-inch height works with 3-inch or 5-inch Wire Binning Fronts. The 5-inch height works with 3-inch or 5-inch Wire Binning Fronts. The 7-inch height works with 5-inch or 7-inch Wire Binning Fronts, and is available only in Chrome Plated (BCP). Match the divider height to the Front height already installed on the shelf to maintain a flush, locked bin assembly.
Lozier Wire Binning Divider finish options and lead times
Chrome Plated (BCP) is the standard finish for most BFD SKUs and is the finish on nearly all depths and heights on this page. The 22-inch depth, 5-inch height SKU ships in Charcoal (CHR), and the 22-inch depth, 3-inch height SKU is available in Platinum (PLT). Any finish outside BCP and CHR falls under Optional Catalog Colors and carries an 8 to 10 week lead time from Lozier. Call 800-934-6798 to confirm lead time before placing a time-sensitive order.