Accessories 20 products
Lozier gondola accessories are the components that close gaps, finish exposed edges, and extend the functional life of an existing shelving installation. When a store planner is filling out a run, adding an end unit, or replacing worn finish-matched trim on a remodel, the accessory order is where mistakes get made and where a mismatched finish code creates a visible problem across every aisle. Getting the accessory specification right requires the same discipline as ordering primary sections.
Finish matching is the first decision to make on any Lozier gondola accessory order. The two standard finishes are Platinum (PLT), a light beige that ships as the default on most Lozier gondola components, and Charcoal (CHR), a darker neutral used in higher-contrast store environments. Both are standard catalog finishes, but lead times still vary by specific SKU, depth, and height combination. Optional Catalog Colors carry an 8 to 10 week lead time and should never be assumed available for a tight project schedule. Always confirm before committing a finish to a remodel timeline.
Accessory compatibility with existing gondola hardware is where orders go wrong most often. Lozier Gap Fillers are depth-specific: the filler ordered must match the base bracket depth in that section, whether that is a 13-inch depth for health and beauty, a 16-inch depth for drug and convenience, a 19-inch or 22-inch depth for grocery and general merchandise, or a 25-inch depth for hardware and auto. Base End Trim is Uprite-height-specific, so a 60-inch Uprite section requires a different trim piece than a 84-inch Uprite section. Ordering trim by finish alone without confirming height and depth will generate a return. Verify both dimensions before submitting any accessory line item.
For configuration assistance on finish-matched accessory orders, depth-specific gap fillers, or base end trim sizing against your existing Uprite height, call 800-934-6798 or email dan@rxshelving.com.
Accessories are where planogram intent meets fixture execution: the hook gauge, sign holder type, and divider selection you specify here directly controls facing density, scan-at-shelf compliance, and reset frequency across the run.
- Peg Hooks: 9-gauge (standard), 3/16in wire (medium duty), and 4-gauge (heavy duty) in multiple lengths
- Pegboard Scanner Hooks (HP138x series): 6-12in lengths, ZNC finish, accepts scan label at the hook base
- Aisle Category Sign Holders (CATSH): wall and island versions, PLT finish, mounts to uprite or top rail
- Wire Can Dividers and Heavy Duty Shelf Dividers for facing control in high-velocity categories
- Wire Basket Brackets (MPBW): mounts to pegboard back panels for gravity-feed and loose-item presentations
- Standard finish: Platinum (PLT). Peg hooks and scanner hooks: Zinc (ZNC) for humidity resistance
- Maximum 10 lbs per individual peg hook regardless of hook gauge or back panel type
Configuration Reference
Lozier Gap Fillers are depth-specific accessories that close the open space between the base bracket and the floor on gondola island and wall sections. The filler depth must match the base bracket depth exactly. Mismatched depths leave visible gaps and create a tripping hazard at floor level in high-traffic aisles.
Lozier Base End Trim finishes the exposed Uprite face on gondola end units. It is sized by Uprite height, not section width, so a 60-inch and a 84-inch Uprite require separate part numbers even when ordered in the same finish. Confirm Uprite height before ordering.
Platinum (PLT) is the standard Lozier finish and the default on most gondola components. Charcoal (CHR) is the second standard finish. Both are available across the accessory line, but lead times vary by SKU. Optional Catalog Colors require 8 to 10 weeks and are not appropriate for remodels with fixed installation dates.
Lozier shelf accessories, including shelf label holders and scan strips, are sized by shelf style. Tilt-In (TL) and Drop-In (DL) shelves use different front rail profiles, and label holder compatibility is not interchangeable between the two styles. Confirm shelf style before ordering any front-of-shelf accessory.
Frequently Asked Questions
How do I know which Lozier gap filler to order for my existing gondola run?
The gap filler depth must match the base bracket depth already installed in that section. Common depths are 13-inch for health and beauty, 16-inch for drug and convenience, and 19-inch or 22-inch for grocery. Ordering by finish alone without confirming base bracket depth is the most common accessory ordering error.
What is the difference between Platinum and Charcoal finish on Lozier gondola accessories?
Platinum (PLT) is a light beige and is the default finish on most Lozier gondola components. Charcoal (CHR) is a darker neutral used in higher-contrast retail environments. Both are standard finishes, but lead times vary by SKU and depth combination, so confirm availability before locking in a project schedule.
Lozier base end trim sizing by Uprite height
Lozier Base End Trim is sized by Uprite height, not section width. A 60-inch Uprite and an 84-inch Uprite require different part numbers even when ordered in the same finish. Always confirm installed Uprite height before submitting a base end trim order to avoid a return.
Lozier gondola accessory Optional Catalog Colors lead time
Optional Catalog Colors on Lozier gondola accessories carry an 8 to 10 week lead time from the manufacturer. This applies to any finish outside of Platinum (PLT) and Charcoal (CHR). For remodels with a fixed installation date, confirm color availability with the distributor before specifying a non-standard finish.