MULTI-PURPOSE BRKTS,10D,WIRE,Pair (LH/RH Pair)
All Variants
| SKU | Finish | Price | Qty | |
|---|---|---|---|---|
| MPBW10.GRY | GRY — Gray | $23.32 | ||
| MPBW13.W08 | W08 — Cool White | $15.40 | ||
| MPBW16.W08 | W08 — Cool White | $16.00 | ||
| MPBW19.W08 | W08 — Cool White | $16.58 | ||
| MPBW22.W08 | W08 — Cool White | $19.53 | ||
| MPBW25.PLT | PLT — Platinum | $22.72 |
Accessories are where planogram intent meets fixture execution: the hook gauge, sign holder type, and divider selection you specify here directly controls facing density, scan-at-shelf compliance, and reset frequency across the run.
- Peg Hooks: 9-gauge (standard), 3/16in wire (medium duty), and 4-gauge (heavy duty) in multiple lengths
- Pegboard Scanner Hooks (HP138x series): 6-12in lengths, ZNC finish, accepts scan label at the hook base
- Aisle Category Sign Holders (CATSH): wall and island versions, PLT finish, mounts to uprite or top rail
- Wire Can Dividers and Heavy Duty Shelf Dividers for facing control in high-velocity categories
- Wire Basket Brackets (MPBW): mounts to pegboard back panels for gravity-feed and loose-item presentations
- Standard finish: Platinum (PLT). Peg hooks and scanner hooks: Zinc (ZNC) for humidity resistance
- Maximum 10 lbs per individual peg hook regardless of hook gauge or back panel type
Configuration Reference
Lozier gondola accessories in this catalog span depths from 10 to 36 inches, covering the full range of standard Lozier section configurations from health and beauty at 13 inches through hardware and auto at 25 inches and beyond. Each accessory must be depth-matched to the installed bracket or shelf it serves, not to the section's nominal label depth.
Standard finishes available in this accessory category are Platinum (PLT), Charcoal (CHR), W08 (white), and GLV (galvanized), all carrying typical 1 to 2 week ship times. Finishes such as BCP, AG6, 1F7, 55B, and other Optional Catalog Colors require 8 to 10 weeks of production lead time. Confirm finish codes against your existing installation before ordering.
Section widths covered in this accessory category are 24, 30, 36, 48, 72, 84, and 96 inches. Not every accessory SKU is available across all widths. Base End Trim (BET) and gap filler widths are specific to the section width they terminate or fill, and substituting an adjacent width will leave a visible gap or create a fit conflict at the Uprite.
Per-piece pricing in this category ranges from $2.73 to $1,466.85, reflecting the span from individual shelf clips and label holders to fully assembled accessory units. Quantity requirements vary by component type. Call 800-934-6798 to confirm per-piece minimums on low-unit accessories before placing an order.
Frequently Asked Questions
How do I know which depth to order for a Lozier gondola accessory?
Match the accessory depth to the actual installed bracket or shelf depth in the section, not the section's nominal label depth. A Base End Trim, for example, must equal the Base Bracket depth it terminates. Lozier accessories in this catalog are available from 13 inches through 36 inches to cover the full range of standard configurations.
What is the difference between a standard finish and an Optional Catalog Color for Lozier accessories?
Platinum (PLT), Charcoal (CHR), W08, and GLV are standard finishes that typically ship within 1 to 2 weeks. All other finish codes in this category are Optional Catalog Colors and require 8 to 10 weeks of production lead time. If your project has a hard opening date, confirm finish availability by calling 800-934-6798 before ordering.
Lozier gondola accessory finish matching
Accessories must match the finish code of the host section's Uprites and shelves to maintain a consistent retail appearance. PLT is the most common installed finish in active Lozier retail environments. If your existing installation uses an Optional Catalog Color such as BCP or AG6, expect an 8 to 10 week lead time to source matching accessory components.
Lozier Base End Trim and gap filler compatibility guide
Base End Trim (BET) closes out the exposed base of a gondola run at the section's end position and must be ordered in the same depth and finish as the Base Bracket it covers. Gap fillers address the vertical space between a shelf and the back panel and are width-specific to the host section. Substituting an adjacent width will not produce a flush fit at the Uprite slot.