Lozier Contoured End Deck (CED), 36"W x 13"D, Left Hand - Foundry
All Variants
| SKU | Finish | Price | Qty | |
|---|---|---|---|---|
| CEDL3013N.A37 | A37 — Foundry | $113.33 | ||
| CEDL3019N.W08 | W08 — Cool White | $129.85 | ||
| CEDL313N.A37 | A37 — Foundry | $125.70 | ||
| CEDL319N.W08 | W08 — Cool White | $134.05 | ||
| CEDL322N.A37 | A37 — Foundry | $140.95 | ||
| CEDL413N.QG8 | QG8 — Gold Vein | $125.70 | ||
| CEDL422N.PLT | PLT — Platinum | $129.93 |
Configuration Reference
Lozier contoured end components are available in widths of 24, 30, 36, and 48 inches and depths from 10 to 28 inches including 10, 13, 15, 16, 17, 19, 22, 25, and 28 inches. The depth of the contoured end component must match the base bracket depth in the same gondola section to maintain a flush base profile and rated load distribution.
Standard finishes for Lozier contoured end components are Platinum (PLT), Charcoal (CHR), and W08 bright white, all of which ship on the standard lead schedule. A37, GRY, QG8, T76, and WHT are Optional Catalog Colors requiring 8 to 10 weeks of production lead time. Buyers adding to an existing installation must verify the finish code from their original purchase order to avoid batch variation on visible end units.
Contoured end components are finish-matched Lozier accessories designed to cap island and wall gondola runs without exposing Uprite edges or raw bracket ends. They are not interchangeable with standard flat end trim. The contoured profile is specific to the Lozier gondola system and will not fit Madix or other manufacturer Uprite patterns.
Pricing for Lozier contoured end components ranges from $60.62 to $169.40 per piece. Price variation within the category reflects differences in width, depth, and finish specification. Optional Catalog Color orders are priced per piece at time of quote and are non-cancelable once production is confirmed.
Frequently Asked Questions
How do I know which depth to order for Lozier contoured end components?
Match the contoured end component depth to the base bracket depth already installed in that gondola section. Available depths in this catalog run from 10 to 28 inches, covering 10, 13, 15, 16, 17, 19, 22, 25, and 28 inches. A depth mismatch at the base creates a visible step that no accessory can correct after installation.
What is the lead time for Lozier contoured end components in a color other than Platinum or Charcoal?
Any finish outside of Platinum (PLT), Charcoal (CHR), and W08 is an Optional Catalog Color and carries an 8 to 10 week production lead time. These include A37, GRY, QG8, T76, and WHT. Call 800-934-6798 before placing an Optional Catalog Color order on a time-sensitive project.
Lozier contoured end components finish compatibility
Contoured end components are available in PLT, CHR, W08, A37, GRY, QG8, T76, and WHT. PLT, CHR, and W08 ship on standard lead times. The remaining five finishes are Optional Catalog Colors with 8 to 10 week lead times. Always pull the finish code from the original purchase order when reordering to avoid visible batch variation on high-traffic end units.
Lozier contoured end component width and section size options
This catalog carries contoured end components in 24, 30, 36, and 48 inch widths. Width must correspond to the gondola section width being capped. Contoured end components are Lozier-system specific and are not compatible with Madix gondola sections or any other manufacturer's Uprite pattern.