End Decks

The Lozier End Deck (ED) is a merchandising deck that locks onto the Base End Trim at the end of a gondola island, closing the run with a finished, load-bearing surface. It carries factory-installed leveling legs and is rated for an evenly distributed load of 1,200 pounds per unit. Installation takes no tools: releasing locking clips seat the deck in place, and the Flush Merchandising Panel does not need to be removed to fit it.

Size an end deck to the island it caps. Widths are 29, 35, 38, 41, and 47 inches, and depths are 13, 16, and 19 inches. Base height is either an 06 Base (8 inches) or a Low Base (6 inches). Order the deck to match the overall island width, which is found by adding 3 inches to the deck width on each side of the run.

Each deck has a 1.235-inch tag molding on three sides for labeling, smooth radius corners welded to the deck top, and two rows of accessory perforations front and rear for hooks and dividers. The standard finish is 1C9 (Platinum top with a Charcoal Black base); optional catalog colors are available on a longer lead time.

Call 800-934-6798 or email dan@rxshelving.com to confirm sizing and finish against your existing run before ordering.

Configuration Reference

The Lozier End Deck (ED) locks onto the Base End Trim to cap the end of a gondola island. Widths are 29, 35, 38, 41, and 47 inches; depths are 13, 16, 19, and 22 inches; base height is an 06 Base (8 inches) or a Low Base (6 inches).

Order the deck to match overall island width by adding 3 inches to the deck width on each side. Each unit carries factory-installed leveling legs and is rated for 1,200 pounds evenly distributed.

Standard finish is 1C9 (Platinum top with Charcoal Black base). The deck installs without tools using locking clips and includes tag molding on three sides plus two rows of accessory perforations front and rear.

Frequently Asked Questions

How does a Lozier End Deck attach to a gondola?

The End Deck (ED) locks onto the Base End Trim at the end of an island run using releasing locking clips, so it installs and removes without tools. The Flush Merchandising Panel does not need to be removed to fit the deck. Factory-installed leveling legs keep it stable on uneven floors.

What size end deck do I need?

Match the deck to the island it caps. Widths are 29, 35, 38, 41, and 47 inches; depths are 13, 16, and 19 inches. Determine overall island width by adding 3 inches to the deck width on each side. Base height is an 06 Base (8 inches) or a Low Base (6 inches).

How much weight does a Lozier End Deck hold?

Each End Deck is rated for an evenly distributed load of 1,200 pounds per unit. It includes a 1.235-inch tag molding on three sides, radius corners, and two rows of accessory perforations front and rear.

What is the standard finish for Lozier end decks?

The standard finish is 1C9, a Platinum top with a Charcoal Black base. Optional catalog colors are available and carry a longer lead time. Confirm the finish code against your existing island before ordering.