Merchandise Panels

Lozier Merchandise Panels add a pegboard or Marteck merchandising surface to the exterior of a gondola Uprite, turning the exposed end or side of a run into usable selling space. They are not gondola back panels: a merchandise panel hangs on the outside face of the Uprite rather than filling the back of a section between uprights.

The catalog offers two types. The Flush Merchandise Panel (FMP) hangs on the outside of the Uprite with its top aligned flush to the Uprite top; it works with Heavy Duty Uprites and End Decks and mounts on an 06 Base, a Low Base, or a T-Leg Base. The Full-Height Merchandise Panel (FHMP) is the floor-standing version, resting on leveling legs and extending past the Base End Trim to absorb up to a 9-inch difference between the floor and the gondola top.

Both types come in widths of 24, 30, 36, and 48 inches and heights from 48 to 96 inches. Exterior panel styles are Pegboard (P), Marteck (M), Woodgrain (W), and Peg Woodgrain (PW), with a Marteck or Woodgrain interior where required. The standard finish is 29T Platinum, with catalog colors available. Merchandise panels are compatible with all gondola back options except Open Backs.

Call 800-934-6798 or email dan@rxshelving.com to confirm sizing and finish against your existing run before ordering.

Configuration Reference

Lozier merchandise panels hang on the exterior of the gondola Uprite to add pegboard or Marteck selling space. They are not gondola back panels. Two types are offered: Flush (FMP) and Full-Height (FHMP).

The Flush Merchandise Panel (FMP) hangs flush to the Uprite top and works with Heavy Duty Uprites and End Decks, on an 06 Base, Low Base, or T-Leg Base. The Full-Height Merchandise Panel (FHMP) is floor-standing on leveling legs and absorbs up to a 9-inch floor-to-top difference.

Widths are 24, 30, 36, and 48 inches; heights run 48 to 96 inches. Exterior styles are Pegboard (P), Marteck (M), Woodgrain (W), and Peg Woodgrain (PW). Standard finish is 29T Platinum. Compatible with all gondola back options except Open Backs.

Frequently Asked Questions

What is the difference between a merchandise panel and a gondola back panel?

A merchandise panel hangs on the outside face of the Uprite to add pegboard or Marteck selling space on the exposed end or side of a run. A gondola back panel fills the back of a section between uprites. Merchandise panels expand merchandising surface; they are not structural back panels.

What is the difference between a Flush and a Full-Height merchandise panel?

The Flush Merchandise Panel (FMP) hangs on the Uprite with its top flush to the Uprite top and works with Heavy Duty Uprites and End Decks. The Full-Height Merchandise Panel (FHMP) is floor-standing on leveling legs, extends past the Base End Trim, and absorbs up to a 9-inch difference between floor and gondola top.

What sizes and panel styles are available?

Widths are 24, 30, 36, and 48 inches, and heights run from 48 to 96 inches. Exterior styles are Pegboard (P), Marteck (M), Woodgrain (W), and Peg Woodgrain (PW), with a Marteck or Woodgrain interior where required.

What is the standard finish for Lozier merchandise panels?

The standard finish is 29T Platinum, with optional catalog colors available. Merchandise panels are compatible with all gondola back options except Open Backs.