S-Series Storage Shelving

Lozier S-Series Storage Floor Anchor

SKU: WS1241.GLV

Part of the Lozier Wall Section Assemblys product family

In Stock

$3.47per piece

Total: $3.47

QUANTITY

Request a custom quote

Shipping & Returns

Freight: We quote every order individually to get you the best rate on LTL freight based on your ZIP, load size, and delivery type. You’ll see the confirmed freight cost within one business day of submitting your quote request — before anything is authorized. Delivery options: dock, curbside, inside, liftgate, delivery appointment, or residential.

Returns: No returns will be accepted without a Return Goods Authorization (RGA) and original packaging. Items shipped factory-direct are considered special order and are not returnable. All other approved returns are subject to a 35% restocking fee plus outbound and return freight where applicable.

Full Terms of Sale ›

FinishGalvanized (GLV)

UnitEA

Lozier Wall Section, GLV finish. Compatible with standard Lozier gondola shelving uprights and base brackets.

Configuration Reference

Section widths: 3 ft (36 in), 4 ft (48 in)
Section heights: 24, 36, 48, 60, 72, 84, 96, 108, 120, 144 inches
Shelf depths: 12, 18, 24 inches (Regular Duty and Heavy Duty / Wire Grid)
Structural finish: Galvanized (GLV). Sliding dividers: Gray (GRY). Back panels: unfinished hardboard.
Stabilization rule: Crossbrace or Back Panel required on both end sections plus every 4th interior section.
Tall-section rules: Over 96 inch height requires two sets of Crossbraces (upper plus lower) AND Heavy Duty (HD) crossbracing. Back panels 108 inches and taller ship as a two-piece assembly joined by an SS1151 Splicer.
Floor anchor required when: bottom shelf exceeds 6 in above floor, height-to-depth ratio exceeds 6:1, or seismic anchoring is specified.
Heavy Duty identification: HD sticker on Uprite side panel; HD stamp in Base Bracket side panel.

Frequently Asked Questions

What is Lozier S-Series Storage Shelving used for?

S-Series is Lozier's backroom and stockroom shelving system. It handles heavier loads and taller sections than customer-facing gondola. Common uses include grocery backrooms, pharmacy stockrooms, automotive parts backrooms, hardware store storage, and general warehouse organization.

What widths and heights does S-Series come in?

Two section widths: 3 ft (36 inches) and 4 ft (48 inches). Section heights match the Uprite range: 24, 36, 48, 60, 72, 84, 96, 108, 120, and 144 inches.

What is the difference between Regular Duty and Heavy Duty crossbracing?

Regular Duty (RD) crossbracing is available for section heights 36 inches through 96 inches. Heavy Duty (HD) crossbracing is required for section heights over 96 inches per Lozier installation instructions. Sections over 96 inches also require two sets (upper plus lower) rather than a single set.

How many crossbraces or back panels does a run require?

Per Lozier install instructions, stabilization is required on both end sections of each run plus every 4th interior section. That stabilization can be provided by either a Crossbrace or a Back Panel per required section.

What accessories are typically ordered with S-Series?

SS2221 Screws (joining open uprite pairs and back panels), SS1511 Lock Washers, SS1311 Back-to-Back Connectors (closed uprite pairs), WS1241 Floor Anchors (safety-required when bottom shelf is above 6 in from floor), SSUC Uprite Connectors (extending unit height), SSFS Floor Protectors / Shims (leveling on uneven floors), SS1151 Back Panel Splicer (two-piece assemblies over 96 in), and SS12xx Sliding Dividers (compartmentalizing shelves).

What finish does S-Series ship in?

Structural components (Uprites, Shelves, Crossbraces, Base and end hardware) ship in Galvanized (GLV) finish as standard. Sliding Dividers ship painted Gray (GRY). Back Panels are unfinished 1/8-inch hardboard. The SS1151 Back Panel Splicer is white plastic (XB1). No optional finishes are catalog for the structural S-Series line.