Contoured End Components
Lozier gondola end units define the visual perimeter of every gondola run, and contoured end components are the finish-matched parts that close out island and wall sections cleanly without exposed hardware or raw Uprite edges. When a store planner is refreshing an existing installation or closing out a new run, the contoured end component selection determines whether the end unit reads as intentional or afterthought. Getting the depth, width, and finish code right on the first order is the only way to avoid a return shipment.
Read more
Depth selection for Lozier contoured end components follows the product category housed in the adjacent gondola section. The 13-inch depth suits health and beauty or HBC applications. The 16-inch depth is standard for drug and convenience store configurations. Grocery and general merchandise runs typically use 19-inch or 22-inch depths. Hardware and auto sections specify 25-inch. This catalog also carries 10-inch, 15-inch, and 17-inch depths (per catalog: CED covers 13, 16, 22, 25; CES covers 10, 13, 15, 16, 17, 19, 22). Section widths run 24, 30, 36, and 48 inches. Matching the contoured end component depth to the base bracket depth in the same section is not optional: a mismatch creates a visible step at the base that cannot be corrected with accessories.
Finish matching is the most common ordering error on contoured end component reorders. Standard finish per catalog is Platinum (PLT). Charcoal (CHR) and Cool White (W08) may be available as active-stock variants; confirm at time of quote. Currently listed Optional Catalog Colors in this category include A37, GRY, QG8, T76, and WHT, each with an 8 to 10 week production lead time. If your existing installation uses one of those Optional Catalog Colors and you are ordering replacement or extension components, confirm the finish code from your original purchase order before placing the new order. Lozier finish batches can show slight variation across production runs, and mismatched end components on a high-visibility end unit will be noticed by every customer who walks the perimeter.
Call 800-934-6798 or email dan@gondolafixtures.com to confirm depth, width, and finish availability before placing a time-sensitive order on Lozier contoured end components.
Configuration Reference
Lozier contoured end components are available in widths of 24, 30, 36, and 48 inches and depths of 13, 16, 19, 22, and 25 inches (Contoured End Display); Contoured End Decks are offered in 13, 16, 22, and 25 inches. The depth of the contoured end component must match the base bracket depth in the same gondola section to maintain a flush base profile and rated load distribution.
Standard finishes for Lozier contoured end components are Platinum (PLT), Charcoal (CHR), and W08 bright white, all of which ship on the standard lead schedule. A37 (Foundry), QG8 (Gold Vein), T76 (Tan), and other Optional Catalog Colors requiring 8 to 10 weeks of production lead time. Buyers adding to an existing installation must verify the finish code from their original purchase order to avoid batch variation on visible end units.
Contoured end components are finish-matched Lozier accessories designed to cap island and wall gondola runs without exposing Uprite edges or raw bracket ends. They are not interchangeable with standard flat end trim. The contoured profile is specific to the Lozier gondola system and will not fit Madix or other manufacturer Uprite patterns.
Pricing for Lozier contoured end components ranges from $60.62 to $169.40 per piece. Price variation within the category reflects differences in width, depth, and finish specification. Optional Catalog Color orders are priced per piece at time of quote and are non-cancelable once production is confirmed.
Frequently Asked Questions
How do I know which depth to order for Lozier contoured end components?
Match the contoured end component depth to the base bracket depth already installed in that gondola section. Available depths per Lozier catalog: Contoured End Display 13, 16, 19, 22, and 25 inches; Contoured End Deck 13, 16, 22, and 25 inches. A depth mismatch at the base creates a visible step that no accessory can correct after installation.
What is the lead time for Lozier contoured end components in a color other than Platinum or Charcoal?
Standard tier finishes (Platinum (PLT), Charcoal (CHR), Cool White (W08), White (WHT), Gray (GRY), Silver (SIL), and Galvanized (GLV)) usually ship in 1-3 business days. Optional Catalog Colors including A37, QG8, T76, and other specialty codes carry an 8-10 week production lead time. Call 800-934-6798 before placing an Optional Catalog Color order on a time-sensitive project.
Lozier contoured end components finish compatibility
Contoured end components are available in the full Lozier finish palette. Standard tier (Platinum (PLT), Charcoal (CHR), Cool White (W08), White (WHT), Gray (GRY), Silver (SIL), and Galvanized (GLV)) usually ships in 1-3 business days. Optional Catalog Colors including A37, QG8, T76, and other specialty codes carry 8-10 week lead times. Always pull the finish code from the original purchase order when reordering to avoid visible batch variation on high-traffic end units.
Lozier contoured end component width and section size options
This catalog carries contoured end components in 24, 30, 36, and 48 inch widths. Width must correspond to the gondola section width being capped. Contoured end components are Lozier-system specific and are not compatible with Madix gondola sections or any other manufacturer's Uprite pattern.