Wall Sections

LOWER WALL STABILIZER

SKU: WS48-PC049

In Stock

$89.02per piece

Total: $89.02

QUANTITY

Request a custom quote

Not sure this is the right part?

Real Lozier expertise on the phone in minutes. Free layout planning and multi-store quote coordination.

800-934-6798 Contact Us ›

Shipping & Returns

Freight: We quote every order individually to get you the best rate on LTL freight based on your ZIP, load size, and delivery type. You’ll see the confirmed freight cost within one business day of submitting your quote request — before anything is authorized. Delivery options: dock, curbside, inside, liftgate, delivery appointment, or residential.

Returns: No returns will be accepted without a Return Goods Authorization (RGA) and original packaging. Items shipped factory-direct are considered special order and are not returnable. All other approved returns are subject to a 35% restocking fee plus outbound and return freight where applicable.

Full Terms of Sale ›

Lozier Wall Section. Compatible with standard Lozier gondola shelving uprights and base brackets.

Wall sections are a single-face fixture: every linear foot of wall run you configure here is your full perimeter merchandising capacity, and the depth and height combination you select determines both facing density and whether an anchoring requirement applies.

Widths: 2ft (24in), 30in, 3ft (36in), and 4ft (48in)
Heights: 48 to 96in
Depths: 13 to 25in (single merchandising face; no back panel on the wall side)
Base types: 06 Standard Base (8in height) or LB Low Base (6in height)
Bracket types: S (Spring Locking) or HD (Heavy Duty, requires HD uprite)
Anchoring required when the height-to-depth ratio exceeds 6:1 per Lozier catalog. Anchor plate parts: DC1241, DC1242, DC1248.
Standard finishes: CHR (Charcoal Black) base front, PLT (Platinum) uprite
Back panel options: P, M, ME, W, PW, PM, S, SI, or NBR on the merchandising face

Compatibility: Wall sections connect between two wall gondola uprights and mount against the perimeter wall. Only the outward-facing side carries a back panel and shelves; no back panel is installed on the wall side. Anchoring requirement is determined by the height-to-depth ratio: any configuration where section height exceeds the maximum standalone height for the specified depth requires a wall anchor. Heavy Duty (HD) brackets require an HD uprite. For sections 78in and taller, two-piece back panels are required with a Splicer Rail at the mid-height joint. The run terminates with a Wall End Display (WED) end cap fixture at each open end.

Designed for: Perimeter wall runs in grocery, C-store, drug, specialty retail, and general merchandise formats. Refrigerated case adjacencies, high-bay perimeter aisles, and any layout where the full wall capacity is the merchandising surface and back-of-fixture access is not a planogram consideration.

Need help sizing your order?

Free layout planning, install-instruction sourcing, and multi-store quote coordination. Real Lozier expertise on the phone in minutes.

800-934-6798 Contact Us ›

Frequently Asked Questions

What finish options are available for Lozier wall sections?

Lozier wall sections are offered in eight standard finishes: Platinum (PLT), Charcoal (CHR), Cool White (W08), White (WHT), Gray (GRY), Silver (SIL), Black (N01), and Chrome Plated (BCP). Standard finish orders typically ship in 1-3 business days. Optional Catalog Colors are also available and carry an 8-10 week lead time. If you are unsure which finish code matches your existing fixtures, confirm with Lozier before ordering.

Do Lozier wall sections need to be anchored to the wall or floor?

Anchoring requirements depend on your specific configuration. Anchoring of free-standing half sections is required. For full sections, anchoring to the floor is required when the height of the uprite, including any extension uprites, exceeds the leveler spacing by a ratio of 6:1. When a wall section is anchored to a wall, the anchoring connection determines the load rating of the system, and the final capacity is limited by the lower of the uprite-and-anchor load rating or a rating provided by a certified structural engineer who has evaluated the wall structure and fastening methods. Local building, fire, sanitation, and seismic codes may also apply, so always check with local building authorities before installation.

Can Lozier wall sections be combined with shelving from other manufacturers?

No. Lozier's own installation instructions explicitly state that Lozier products should not be combined with non-Lozier products. Mixing components from different manufacturers can compromise the structural integrity of the fixture and may create safety hazards. All components in your wall section run should be genuine Lozier components to ensure proper fit, load performance, and compliance with Lozier's installation requirements.